- 01
Audi log book servicing
Minor and major servicing to the manufacturer schedule for your exact model, engine and build — engine oil and filter, cabin and air filtration, brake fluid when due, and a full multi-point inspection.
- 02
Engine oil & filter servicing
Correct Audi-approved engine oil specification selected for the exact engine, model year and VIN, with the correct OE-quality or genuine filter.
- 03
DSG / S tronic servicing
Fluid and filter servicing on DQ250, DQ381, DQ500, DL382 and DL501 units. Service requirements depend on transmission type and the manufacturer schedule for your car — we confirm from your VIN.
- 04
Haldex & quattro maintenance
Haldex coupling oil and filter servicing where fitted, plus driveline inspection on quattro models. Applicability depends on generation and model.
- 05
Audi diagnostics & fault finding
ODIS-supported fault finding, live data, adaptations and diagnostic procedures across every module — not a generic OBD code read. Check engine light diagnosis with evidence before any repair is quoted.
- 06
Cooling-system repairs
Coolant leaks, water pump and thermostat faults, expansion tanks, hoses and radiators. Housings are inspected for leakage and deterioration during servicing.
- 07
Oil & coolant leak repairs
Traced properly on the hoist and photographed — rocker cover and chain cover gaskets, sump seals, oil coolers, turbo feed and return lines, coolant flanges.
- 08
Timing-system diagnosis & repair
Timing-system requirements vary by engine family, build date, service history and measured condition. We assess correlation values, stored faults, start-up noise and relevant live data before recommending work.
- 09
Suspension & control-arm repairs
Control arms, bushes, ball joints, wheel bearings, shocks and air suspension faults on A6, A7, A8 and Q7 platforms, with alignment afterwards where required.
- 10
Brake servicing
Pads, discs, sensors, handbrake actuators and electronic parking brake service positions, plus brake fluid to the manufacturer interval.
- 11
Carbon cleaning where indicated
Carbon cleaning may be recommended where symptoms, inspection or diagnostic findings indicate intake-valve deposits — borescoped first, never sold on a generic interval.
- 12
Pre-purchase inspections
On-hoist inspection, ODIS multi-module scan, road test and a written report before you sign on an A3, A4, Q5, S or RS.
- 13
Performance calibration (secondary)
Performance calibration and supporting hardware are available on selected Audi platforms. Suitability depends on ECU/TCU type, existing modifications, fuel and intended use.